Ramy Magdy Abaza, Mostafa Mohamed Hosny And Hazem Mohamed Mandour,

ABSTRACT
Background: The Aim Of The Present Study Was To Determine Age And Gender Radio-graphically Based On Comparison Between CBCT And Panoramic Views Of Maxillary Sinuses. Methods: One Hundred And Twenty Patients Were Selected. Patient Divided Into Three Groups According To The Age Each Group Consist Of 40 Patients. Group 1: Young Adults (14-20 Years). Group 2: Adults (21-40 Years). Group 3: Elderly (>40 Years). CBCT And Panoramic Radiographs Were Taken For Every Patient To Evaluate Of The Volume, Vertical As Well As Horizontal Dimensions Of Maxillary Sinus.

Results: In (14-20 Years) Age Group, CBCT Was Higher Predictive Than Panorama In Height And Width. In Age Group (21-40 Years); CBCT Was Higher Predictive Than Panorama In Width And Height. While In Age Group (>40 Years); Both CBCT And Panorama Was Same Predictive Results In Both Width And Height. In (14-20 Years) Age Group CBCT Left Side MS Volume Was Higher Predictive Than Right Side. In (21-40 Years) Age Group Right Side Is Higher Predictive Than Left Side In MS Volume. In (>40 Years) Age Group CBCT Right Side Is Predictive As Left Side In MS Volume. Conclusion: CBCT Images Provide Reliable Volumetric Information For Gender And Age Determination.

Ahamed Mostafa Ahamed Elhashash, Mostafa Mohamed Hosny And Mohamed Mohamed Bayoumi,

ABSTRACT
Background: The Aim Of This Study Was To Evaluate Clinical Outcome Of The Use Of Concentrated Rich Plasma Growth Factors And Tri Calcium Phosphate With Immediate Implant At Sites Of Advanced Periodontal Destruction. Methods: Twenty Patients (8 Males And 12 Females; Age Range: 28 To 42 Years) With Advanced Periodontal Destruction Were Participated In This Study. After Tooth Extraction The Socket Was Cleaned And Irrigated With Normal Saline And Currated By Remove Any Granulation Tissue. The Implant Then Was Applied At The Socket With CGFs Membrane Around It. Beta Tri Calcium Phosphate Particles Was Applied Into The Small Gap Between The Implant And Bone And Buccally To Augment The Absorbed Crestal Bone Using A Plastic Or Titanium Applicator. The Bone Graft Particles Then Covered By The CGF Membrane. Modified Plaque Index (PI), Gingival Index (GI), Peri-implant Probing Depth (PD) And Osstell Were Assessed After, 3 And 6 Months Following Treatment To Monitor The Patient Oral Hygiene Status. Marginal Bone Loss And Bone Density Were Evaluated 3 And 6 Months.

Results: Mean Modified Plaque Index And Modified Gingival Index Was A Statistically Non-significant At 6 Months. Mean Probing Depth Was Statistically Significant At 6 Months. Mean Crestal Bone Loss At 6 Months Was 1.0 � 0.5 At Buccal Surface And 0.9� 0.4 At Lingual Surface. At 3 Months The Mean Bone Density Was 647.40 � 138.48 While At 6 Months It Was 788.50� 105.51. The Difference Was A Statistically Significant At 6 Months. Conclusion: Within The Limits Of The Present Study, The Use Of CGFs With The Immediate Placement Of Dental Implants In Periodontally Compromised Extraction Sites Reduces Marginal Bone Loss Around The Implant.

Ahmed Abdelmaqsoud Abdelmageed Saad, Hazem Mohamed Mandour And Mostafa Mohamed Hosny,

ABSTRACT
Background: The Aim Of The Present Study Was To Evaluate Clinically And Radiographically, The Alveolar Bone Status After Socket Preservation Using ?-tricalcium Phosphate With And Without IPRF Of Extracted Teeth Affected By Periodontitis Stage IV Grade C. .Methods: The Patients Were Randomly Assigned To Two Groups: Group I: (10 Patients) For Those Periodontal Surgical Procedures Of The Defects Were Filled With ? Tricalcium Phosphate Alone. Groups II: (10 Patients) Were Received Periodontal Surgical Procedures Where The Defect Was Filled With ? Tricalcium Phosphate Mixed With I-PRF. Cone Beam Computed Tomography Were Taken At Time Of Initial Examination And At 6 Months To Evaluate The Alveolar Bone Length, Width And Density.

Results: In The Present Study, Immediately, And 6 Months; There Was No Statistically Significant Difference Between Lengths In The Two Groups. ?-TCP /I-PRF Group Showed A Statistically Significant Less Percentage Of Change Than ?-TCP Group. Immediately, And 6 Months; There Was No Statistically Significant Difference Between Width In The Two Groups. ?-TCP /I-PRF Group Showed A Statistically Significant Less Percentage Of Change Than ?-TCP Group. Immediately, And 6 Months; There Was No Statistically Significant Difference Between Mean Density In The Two Groups. ?-TCP /I-PRF Group Showed A Statistically Significant Increase Bone Densitythan ?-TCP Group. Conclusion: Extraction Sockets Treated With I-PRF Combined With Alloplast Showed Least Reduction In Alveolar Ridge Width And Height At The End Of The Study Period, As Well As Greatest Increase In Bone Density Than The Other Studied Groups. Immediate Socket Augmentation Might Provide Advantages In The Management Of Extraction Sockets In Periodontally Compromised Teeth.

Mohamed Ahmady Abdelrahman Ahmed, Ahmed Ahmed Hussein Elfeky And Ahmed Mohamed Hosney,

ABSTRACT
Background: The Present Study Was Performed To Evaluate Immediate Implant Placement With Socket-shield Technique By Bone Trephine Bur Versus Conventional Technique In Maxillary Aesthetic Zone. Methods: Patients Were Randomly Divided In To Two Groups:For Group A: Immediate Implant With Socket-shield Technique By Surgical Bur. For Group B: Immediate Implant Placement With Socket-shield Technique By Trephine Bur. After Surgery Each Patient Were Evaluated As Follows: Pain (VAS), Peri-implant Infections With Suppuration, Implant Stability, Marginal Bone Height And Bone Density Around The Implant At Interval 3, 6 Months.

Results: In The Present Study, Clean Cut: Trephine Group Showed A High Clean Cut (100.0%) Than Conventional (bur) Group (62.5%). Trephine Group No Chance To Harm Adjacent Teeth (0.0%) Than Conventional (bur) Group That Has (25.0 %) To Harm Adjacent Teeth. At 1, 2, 3 And 6 Months; There Was No Statistically Significant Difference In Mean Marginal Bone Loss And Mean Bone Density Measurements In The Two Groups. Conclusion: Socket Shield Represents A Promising Technique To Preserve The Extraction Site Associated With Implant Placement. By Using The Trephine, A Circular Clean Cut Is Obtained. Trephine Group Showed A Less Time Of Operation Than Conventional (bur) Group.

A.S. Rozeik, K. Fawzy El-Sayed, And S. El-Kholy,

ABSTRACT
Objective: The Present Study�s Aim Was To Test The Proliferation And Adhesion Of Human Gingival Fibroblasts To Different Polymer Dental Implant-abutment Materials Including Polyetheretherketone (PEEK) And Hydroxyapatite Reinforced Polyetheretherketone (HA-PEEK) In Comparisons To Conventional Abutment Materials As Titanium (Ti).

Materials and Methods: 40 Specimens Per Group Were Prepared With The Dimension Of 10 Mm (length) � 10 Mm (width) � 1 Mm (height) Per Specimen. Wettability Properties Of The Materials Were Assessed By Water Contact Angle Measurement (after The Adjustment Of Their Surface Roughness). Human Gingival Fibroblasts (HGFs) Proliferation Was Assessed Using Proliferation Assay After 24 Hours And 72 Hours Cell Culture. While, Cell Adhesion Strength Was Evaluated After 24 Hours Of Cell Culture By Applying Lateral Shear Forces In The Form Of Two Shaking Intensities 320 And 560 Rpm.

Results: Regarding The Wettability Properties Using The Water Contact Angle System, Ti Showed The Lowest Contact Angle Followed By PEEK And HA-PEEK With No Statistical Significance Difference (P> 0.05). While, HA-PEEK Showed The Highest Ratio Of Cell Viability At 24 Hours Followed By PEEK And Ti With No Statistically Significant Difference Between The Tested Groups (P> 0.05). While, At 72 Hours Ti Showed The Highest Ratio Of Cell Viability Followed By HA-PEEK And PEEK With Statistically Significant Difference Between Ti And PEEK Groups (P> 0.05) Using MTT Proliferation Assay. Furthermore, PEEK Showed The Best Adhesion Strength After 320 Rpm Shaking Intensities Followed By HA-PEEK And Ti. While At 560 Rpm, HA-PEEK Showed The Best Adhesion Strength Followed By PEEK And Ti. Conclusion: Dental Implant Abutment Material And Its Wettability Affect HGFs Proliferation And Adhesion. Furthermore, Polymer Abutment Materials Showed Similar Interaction Properties With HGFs Regarding Proliferation And Adhesion In Comparison To The Conventional Titanium Abutment Material.

Rahma A Abuhashema, Mai M Akah, Noha S Abu-Taleb And Omayma M Safwat,

ABSTRACT
Objective: The Purpose Of This Clinical Trial Was To Assess The Effect Of Glass Ionomer Restoration With And Without Application Of Nano Silver Fluoride (NSF) Solution On The Remaining Carious Dentin Remineralization And Tertiary Dentin Formation After Partial Caries Removal In Occlusal Carious Molars. Methods: This Was A Split Mouth Study That Included Twenty-two Patients Having Two Contralateral Deep Occlusal Carious Molars. A Total Of 44 Cavities Were Prepared With Partial Caries Excavation Technique. For Each Patient, The Cavity At One Side Was Treated With 0.2 Ml Of NSF Solution Prior To Glass Ionomer Restoration With Glass Hybrid System; This Comprised The Study Group. For The Other Side, Glass Hybrid Was Directly Applied Into The Cavity; This Comprised The Control Group. Standardized Digital Periapical Radiographs Were Performed At Baseline And After 6 Months. The Carious Dentin Density And The Remaining Dentin Thickness Were Assessed.

Results: 16 Out Of The 22 Included Patients Completed The Study. Statistically Significant Increase In Both The Dentin Density And The Remaining Dentin Thickness Were Found In Both Groups After 6 Months. The Percentage Change In The Density After 6 Months Was Significantly Higher For The Study Group. However, No Statistically Significant Difference Was Found Between Both Groups In The Thickness Of The Tertiary Dentin Formed. One Case Of Clinical Failure In Each Group Was Observed.

Conclusions: Partial Caries Removal For Deep Carious Lesions And Glass Hybrid Restoration With And Without Prior Application Of NSF Proved Remineralization Of The Remaining Carious Dentin, And Tertiary Dentin Formation. Carious Dentin Remineralization Was Better Using NSF Which Indicates Its Promising Role In Caries Arrest.

Nada Farid Shehab, Reham ElBasty And Hesham Katamish,

ABSTRACT
Statement Of Problem: Veneered Zirconia Restorations Exhibit Very High Modulus Of Elasticity And High Incidence Of Veneer Chipping. Therefore, The Continuous Search For High Strength Esthetic Restorations Is Never Ending.

Purpose: To Evaluate The Fracture Resistance And Mode Of Failure Of Of CAD/CAM Milled PEEK Core Veneered By Milled High Impact Polymer Composite Compared To CAD-On Zirconia Core Veneered By Lithium Disilicate.

Materials and Methods: Fourteen Freshly Extracted Molars Were Mounted In Epoxy Blocks And Uniformly Prepared With A 1.0 Mm Circular Deep Chamfer Finish Line. They Were Divided In To Two Groups According To The Type Of Material (n=7): Group A: Teeth Restored By ZirCAD Core Veneered By E.max-CAD And Group B: Teeth Restored By PEEK BioHPP Core Veneered By HIPC. All Crowns Were Adhesively Cemented. They Were Then Subjected To Thermo-mechanical Aging Using A Chewing Simulator Then Static Compressive Loading Till Failure Using A Universal Testing Machine And Failure Types Were Determined.

Results: PEEK Group Recorded Statistically Non-significant (p>0.05) Higher Fracture Resistance Mean Value (2851.1�241.02 N) Than Zirconia Group (2786�240 N) As Indicated By Unpaired T-test. The Mode Of Fracture In Zirconia Group Was Manifested As Veneer Chipping In Almost All Of The Specimens. All PEEK Specimens Showed Cohesive Failure In Both Core And Veneer Layers Upon Failure.

Conclusions: Within The Limitations Of This Study, It Can Be Concluded That PEEK Veneered By HIPC Can Be Considered A Potential Permanent Crown And Bridge Material With Comparable Results To Veneered Zirconia Restorations.

Michael Emad, Carl Hany And Hesham Katamish,

ABSTRACT
Statement Of Problem: Marginal Inaccuracy Causes A Space Between Restoration And Prepared Tooth, Which Accelerates Cement Dissolution, Leading To Secondary Caries, Pulpal Lesions, Postoperative Sensitivity, Periodontal Disease And Marginal Discoloration. Marginal Gap Should Be Less Than 120�m. Aim Of This Study Is To Evaluate Vertical Marginal Gap Of PEEK (Bio-HPP) Veneered With CAD/CAM Composite Veneer (HIPC) As Compared To Zirconia Veneered With CAD-On Lithium Disilicate Glass Ceramic. And The Effect Of Ageing On The Gap Of Both Restorations.

Materials and Methods: 40 Extracted Molars Were Prepared, Divided Into Two Groups, Control Group (ZR) (n=20), Teeth Restored With IPS E.max ZirCAD Copings Veneered With IPS E.max CAD And Intervention Group (PEEK) (n=20), Teeth Restored With BreCAM BioHPP Copings Veneered With BreCAM.HIPC. Each Specimen Was Photographed Using Leica S8 APO Stereomicroscope Under Magnification 32X And Image Analysis Was Done. Measurements Were Taken Twice Before And After Thermo-mechanical Cycling.

Results: PEEK Group Recorded Higher Gap Mean Values (49.88�7.97um) Than Zirconia (18.39�3.1um). This Was Significantly (p < 0.05) As Confirmed By Mann-Whitney Test, But All Measurements Were Clinically Acceptable. And Thermo-mechanical Cycling Had No Effect Of On Both Groups. Conclusion: PEEK Veneered With Composite Can Be Used Intra Orally For Single Crown Restorations.

Angel W. Habib , Moustafa N. Aboushelib And A.Nour A. Habib,

ABSTRACT

Objectives: To Study The Effect Of Aging On The Surface Roughness And Surface Hardness Of Stained Different Dental Ceramics.

Materials & Methods: Six Different All Ceramic Substrates (n=10/material) Mark II, Empress CAD, E.max CAD, ZirCAD LT, ZirCAD MT Multi And Suprinity Were Used. The Ceramic Materials Were Stained With Either IPS Ivocolor (n=5/material) Or Vita Akzent Stain (n=5/material). Aging Was Done According To ISO 6872. The Surface Roughness (Ra) Was Evaluated Using Profilometer, While The Surface Microstructure Was Examined Using Scanning Electron Microscopy (SEM). The Surface Hardness Was Measured Using Vicker�s Hardness Test. All These Tests Were Performed Before And After Aging. The Two-way ANOVA Tests And Bonferroni�s Post-hoc Test Were Used For Statistical Analysis.

Results: Aging Had Significantly Increased The Surface Roughness (?Ra) In All Specimens. The SEM Images Supported These Results As It Showed Scratches And Pitting Of The Surface. Aging Also Significantly Decreased The Surface Hardness, However ZirCAD LT When Stained With IPS Ivocolor And ZirCAD MT Multi And E.max When Stained With Vita Akzent Showed Significant Increase.

Conclusions: Aging Had Significantly Affected The Surface Roughness And Hardness Of The Stained Monolithic Ceramics.

Mostafa Magdy Awad Mostafa, Mona Shoeib And Hani El-Nahass,

ABSTRACT
Objective: The Aim Of This Study Is To Clinically Evaluate The Stability Of Short Implants (5.5mm) Versus Standard Implant (10mm) Placed With Osteotome Sinus Floor Elevation In Patients With Edentulous Posterior Maxilla.

Materials and Methods: The Purpose Of This Study Is To Clinically Evaluate The Stability Of Short Implants (5.5mm) Versus Standard Implants (10mm) Placed With Osteotome Sinus Floor Elevation Technique In Medically Free Patients. This Study Included 16 Implants Placed In 16 Patients. With 8 Implants In Every Group.

Results: Pain And Swelling Were Measured 12 And 8 Days Respectively After Dental Implant Placement. Recession, Probing Depth, Bleeding And Plaque Indices Were Recorded 4 Months And 12 Months After The Day Of Implant Placement. Conclusion: After Analysis Of The Data Of This Present Study, We Can Conclude The Following: The Two Implant Placement Protocols Showed Comparable Implant Stability Quotient (ISQ) And Implant Success. In Terms Of Crestal Bone Loss, No Statistically Significant Difference Was Found Between Both Groups Initially, 6 And 12 Month Followup. Except After 4 Months, A Significantly Higher Mean Crestal Bone Loss Was Recorded In Long Implants With Sinus Lift Higher Results Of Post-operative Pain And Swelling (12 And 8 Days Respectively) Were Evident In The Control Group (standard Implant With Osteotome Sinus Floor Elevation) Than The Intervention Group (short Implant 5.5mm). But Found To Be Statistically Insignificant PPD, And MPI Showed No Statistically Significant Difference Between Both Groups. MBI Showed A Significant Higher Values In Long Implants After 4 Months (p=0.006) Than Short Implants.